How it works

We are a manufacturer of professional tile leveling systems, floor level markers for self-leveling floor, and other finishing accessories.

Being the most recognizable brand in the leveling systems market in Russia, we also deliver our products to all countries of the world. We will be glad to cooperate with you and see you among our clients.

Instructions

How does the 3D KRESTIKI leveling system work?

Step 1. Apply adhesive and lay the first tile. Place two clips under the tile on each side, about 50 mm away from the edge of the tiles.

Step 2. Lay the next tile on one side as shown in the Figure.

Step 3. Insert a wedge between the tiles and the top of the clip. Fix it so that the bottom of the wedge fits snugly against the tiles and the sides of the tiles are aligned.

Step 4. To remove the 3D KRESTIKI after the glue dries up, simply hit the top of the clip along the seam of the tiles.

Step 5. The bottom part of the clip will remain under the tiles. Collect the wedges — they may be reused for up to 50 times.

100% guaranteed result!

Video

Step 1. Find the zero point (the highest point of the floor).

Step 2. Cut and attach the 1st floor level marker to the zero point.

Step 3. Cut and attach the rest of the floor level markers.

Step 4. Pour the self-leveling floor.

Recommendations:

Prime the surface.
Consumption: 1 piece — 1 square meter.
The minimum thickness is 0.4 cm.
Cut off the excess before pouring to sink in the floor level marker.

Video

Step 1. Wall marking.

Step 2. Drill holes for expansion plugs 8x40 mm.

Step 3. Cut and attach the rest of the floor level markers.

Step 4. Pour the self-leveling floor.

Video

Step 1. Apply glue to the wall and lay the first row of the stone by level.

Step 2. Insert fixers at a distance of 5 cm from the edge of each stone close to the placed row right in the glue.

Step 3. Lay the following rows of decorative stone.

Step 4. After the adhesive dries, pull out the fixers - they can be re-used later.

Video

Tile leveling system

How does the 3D KRESTIKI leveling system work?

Step 1. Apply adhesive and lay the first tile. Place two clips under the tile on each side, about 50 mm away from the edge of the tiles.

Step 2. Lay the next tile on one side as shown in the Figure.

Step 3. Insert a wedge between the tiles and the top of the clip. Fix it so that the bottom of the wedge fits snugly against the tiles and the sides of the tiles are aligned.

Step 4. To remove the 3D KRESTIKI after the glue dries up, simply hit the top of the clip along the seam of the tiles.

Step 5. The bottom part of the clip will remain under the tiles. Collect the wedges — they may be reused for up to 50 times.

100% guaranteed result!

Video

Plaster markers for self-leveling floor

Step 1. Find the zero point (the highest point of the floor).

Step 2. Cut and attach the 1st floor level marker to the zero point.

Step 3. Cut and attach the rest of the floor level markers.

Step 4. Pour the self-leveling floor.

Recommendations:

Prime the surface.
Consumption: 1 piece — 1 square meter.
The minimum thickness is 0.4 cm.
Cut off the excess before pouring to sink in the floor level marker.

Video

Mounts for plaster markers

Step 1. Wall marking.

Step 2. Drill holes for expansion plugs 8x40 mm.

Step 3. Cut and attach the rest of the floor level markers.

Step 4. Pour the self-leveling floor.

Video

Seam fixers for decorative stone laying

Step 1. Apply glue to the wall and lay the first row of the stone by level.

Step 2. Insert fixers at a distance of 5 cm from the edge of each stone close to the placed row right in the glue.

Step 3. Lay the following rows of decorative stone.

Step 4. After the adhesive dries, pull out the fixers - they can be re-used later.

Video

Frequently asked questions

Lets get you some answers.

How does 3D KRESTIKI system work?

It consists of two elements: a re-usable wedge and a disposable clip. The wedge is fixed with a clip and aligns the tile surface. The alignment is due to the ideal base of the wedge and its tracking force.

What to do if the clip chipped in the tile?

If the lower part of the clip is left inside during the removal stage, it should be so! After the solution dries, the seams are floated. If the clip burst in the seam (this can happen if there is a glue solution on the clip leg), remove all the remains of the plastic parts.

How long does it take to set the system?

You can do that on the next day!

Can I work without tools?

Of course you can! The tool makes it easy to work on large areas.

What size seams are possible?

1 mm, 1.5 mm, 2 mm.

What kind of marketing support do we offer?

We constantly conduct marketing programs and sales promotion activities, we provide printed brochures, stands, advertising products and other handouts and marketing POS materials to work with clients and partners.

Can I use Tile Leveling Systems when laying tiles on warm floors?

Yes, you can.

How many times can I use the wedge?

50 or more times.

How does 3D QUATTRO system work?

The clip has movable guides that allow you to lay tiles on different schemes (T - shaped coupling, cross, offset) adjusting the gap and speeding up the installation.

For which tile sizes will this system be suitable?

This system is designed to solve the most difficult tasks in laying large format tiles from 600x600 to 1000x3000 with a thickness of up to 1.5 cm.

What is the seam size?

1.5 mm

What is the uniqueness of 3D QUATTRO system?

The Multi-clip has holes for filling voids with glue. And most importantly, when dismantling, there is a simultaneous detachment.

How does it work?

Find the highest point of the floor, cut and attach the first plaster marker to this point. Then cut off and attach all other plaster markers and fill in the self-leveling floor!

What type of self-leveling floor does the plaster marker work with?

With any type of self-leveling floors.

Is there any type of the year when it's prohibited to use the plaster marker?

Plaster markers are used at any time of year.

How does disassembly work?

No disassembly is not needed.

What kind of marketing support do we offer?

What additional tools do you need? Will a newbie be able to cope with such a job?

No special skills or tools are required to work with plaster markers.

Materials spent?

1 pc - 1 sq.m.

What is the minimum thickness of the layer?

Min. layer thickness 0.4 cm

Do I need to use the priming on the surface before installing plaster markers?

You must do that.

How does it work?

All works are conducted in several stages. First, the places for installation are planned. Holes are drilled in several places along the marked vertical line. Having put the expansion plugs in the holes, screw in self-drilling screws, which heads are set according to the level. In the final stage, the plaster markers are attached to screws with the help of our system parts. At the end of installation, the level is checked again and the object is ready for plastering.

For which plaster markers is this system used?

For all kinds of plaster markers.

What about disassembly?

No disassembly required.

Can I adjust the plaster markers positions?

Yes.

Are there any self-drilling screws in the set?

Self-drilling screws and expansion plugs are not included in the set.

What kind of marketing support do we offer?

How does the seam fixer work?

The seam fixer is perfectly smooth, dense block of polyurethane, which allows you to achieve the same thickness of the seam when laying: decorative stone, clinker tiles, facing brick.

Can I work without tools?

Of course you can! The tool makes it easy to work on large areas.

What size are possible?

6х10х30 mm, 8х12х30 mm.

What kind of marketing support do we offer?

How many times can I use the seam fixers?

The seam fixers are re-usable.

The widest range of tile leveling systems!

Manufacturer of professional tile leveling systems № 1 in Russia!

Quality you can be sure in our quality!